Union Robotics

Union Robotics
Manuals
- Meadowhawk 2
  - Meadowhawk 2 User Guide
    TABLE OF CONTENTS
    1. GENERAL
    2. OPERATING LIMITATIONS
    3. EMERGENCY PROCEDURES
    4. NORMAL OPERATING PROCEDURES
    5. PERFORMANCE
    6. WEIGHT AND BALANCE EQUIPMENT LIST
    7. DESCRIPTION OF THE sUAS AND SYSTEMS
    8. HANDLING, CARE, AND MAINTENANCE
    9. SUPPLEMENTS
    1. SONY RX0
    2. SONY RX100
    DISCLAIMER AND WARNING
    LIMITATION OF LIABILITY
- HereLink Blue
  - HereLink Blue User Guide
    Air Unit
    Air Unit Specifications
    Air Unit LEDs
    Air Unit Interface & Installation
    Ground Station
    Ground Station Specifications
    Ground Station Buttons & LED
    Ground Station Charging
    UR/Solex TX App
    Pairing & Calibration
    Configure Buttons
    Share Video Stream
    Connecting to Mission Planner
    Installing a Custom App
    Installing QGC
    Important Notes & Warnings
    Update Firmware
    Bug Report
  - HereLink Blue FAQs

Powered by GitBook

Ground Station Specifications

PreviousGround Station NextGround Station Buttons & LED

Last updated 2 years ago

On this page

Feature

Specification

Housing:

6061 Aluminum

Dimensions:

245mm × 116mm × 40mm not including external antenna and joystick

Weight:

920g (w/ antennas)

Screen:

5.46 inch, 1080P, 16 Million Colors, Capacitive Touch Screen

Audio:

1x Built-in Speaker, 2x Built-in Microphone

Remote Control:

2x Joystick, 1x Wheel, 6x Button, 1x Upper Right Button

Communication:

WIFI/GPS 2.4GHz

LED:

2x tricolor LED (left, right)

Interface:

1x MicroUSB, 1x Micro SD Card Slot (extendable to max 64GB)

Antenna:

2.4GHz (1.9dBic) × 2 detachable ,built-in wifi antenna, built-in GPS antenna, external GPS antenna interface x 1 (optional)

Power:

4950mAh built-in Li-ion battery

Charging:

Support Micro USB 5V 2A

Power Consumption:

<4W Average (with transmission on, medium screen brightness, WIFI off, GPS off)